fbpx

pumps

Filters

Showing all 12 results

12 products

  • Sale
    KSh 7,500.00 Buy on whatsapp

    Dayliff DDP 60

    The Dayliff DDP peripheral pump is specially designed for  domestic and commercial water supply uses. It is of high specification peripheral featuring copper windings, a high capacity motor and stainless steel housing inserts to ensure impeller movement. The pump body is manufactured from cast iron and impeller from brass. MOTORS Pumps are close coupled to reliable TEFC electric motors for continuous operation and are provided with a thermal cutout to protect against electrical overload. They can be connected directly to the mains power supply through a 10A fuse or MCB.
    KSh 7,500.00
    KSh 7,500.00 Buy on whatsapp
  • Sale
    KSh 4,000.00 Buy on whatsapp

    Dayliff Pressure Pump Control

    This unit is programmed to perform all the pump control operations automatically When a particular operational break down occurs, the unit recognizes the breakdown and the red  led "failure" lights up. At the same time, a stop signal is sent to the pump to prevent damages caused by dry running Rectification of the failures that have caused the blockage allows the system to be restarted by pressing the "restart" button Features include:- Pump stop time adjustable between 10 to 180 secs.Starts pump when flow is sensed (minimum 2.4litres/min) and stops when flow ceases. System is un-pressured in no flow condition so eliminating pump cycling.  
    KSh 4,000.00
    KSh 4,000.00 Buy on whatsapp
  • KSh 5,000.00KSh 10,000.00 Buy on whatsapp

    Dayliff Pumps

    Built-in thermal overload protection Maximum suction of up to 7 meters on ground level Pumps up to 70 meters above ground Cast iron pump body hence lasts long Can be directly connected to main power supply through a 10Amp fuse
    KSh 5,000.00KSh 10,000.00
    KSh 5,000.00KSh 10,000.00 Buy on whatsapp
  • Sale
    KSh 2,200.00 Buy on whatsapp

    Float switch

    A float switch is a mechanism used to detect the level of water around a submersible pump, allowing the pump to operate automatically – when the water reaches a certain pre-set depth the float switch will trigger the pump to switch on and start pumping.
    KSh 2,200.00
    KSh 2,200.00 Buy on whatsapp
  • Linz Pumps

    Built-in thermal overload protection Maximum suction of up to 7 meters on ground level Pumps up to 70 meters above ground Cast iron pump body hence lasts long
    KSh 9,000.00
  • Sale
    KSh 8,500.00 Buy on whatsapp

    Mondial Pressure Pump Control

    Motor Insulation Class F Operating Conditions Maximum Fluid Temperature +60C Maximum working pressure 8 Bar Maximum Flow Rate 6 Pump Information Model Presscontrol 1.1kW Power (kW) 1.1 Cut Pressure 1.5 Bar Maximum Operating Current (A) 16 Dimension(mm) A 160 Dimension(mm) B 200 Dimension(mm) C 160 Outlet BSP 1" Weight (kg) 1.3
    KSh 8,500.00
    KSh 8,500.00 Buy on whatsapp
  • Pedrollo CPM158 1.0hp

    OPERATING CONDITIONS
    • Pumped liquid: Thin, clean, chemically non-aggressive liquids without solids or fibres.
    • Max. Fluid Temperature: +90° C
    • Max. Ambient Temperature: +40° C
    • Max. Suction lift: 7 m (at sea level).
     
    KSh 25,000.00
  • Pedrollo PKm60

    The Pedrollo PKm is a robust, and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass. The pumps have been remodelled and re-engineered offering the following benefits; Pedrollo logo inserted in the body pump Quiet operation due to the anti vibration system between shaft and impeller More compact More efficient motor with low energy consumption and lower operating temperature. Special paint which gives improved resistance against environmental corrosion Longer life Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop. MOTOR Pumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.
    KSh 9,000.00
  • Sale
    KSh 18,000.00 Buy on whatsapp

    Pedrollo PKM65 0.7hp

    Features Quiet operation due to the anti vibration system between shaft and impeller • More compact • More efficient motor with low energy consumption and lower operating temperature • Special paint which gives improved resistance against environmental corrosion • Extended life  
    KSh 18,000.00
    KSh 18,000.00 Buy on whatsapp
  • Pedrollo Pumps

    Built-in thermal overload protection Maximum suction of up to 7 meters on ground level Pumps up to 70 meters above ground Cast iron pump body hence lasts long
  • Pedrollo Submersible pump 1hp with FREE 20m Cable

    Features Liquid type: Clean Water Uses: domestic, agriculture Applications: water supply systems, pressure systems, irrigation pumps typology: submersible Family: submersible 4" peripheral pumps   Application Limit: The temperature of the liquid to +40 °C • Maximum immersion depth of 40 m with a sufficiently long power cable • Vertical and horizontal installation • Continuous service S1
    KSh 40,000.00
  • PEDROLLO- 0.7HP / 0.5KW / 220V

    • Pedrollo logo inserted in the body pump
    • Quiet operation due to the anti-vibration system between the shaft and impeller
    • More compact
    • More efficient motor with low energy consumption and lower operating temperature.
    • Special paint which gives improved resistance against environmental corrosion
    • Longer life
    KSh 25,000.00
Need Help? Chat with us via Whatsapp