The Dayliff DDP peripheral pump is specially designed for domestic and commercial water supply uses. It is of high specification peripheral featuring copper windings, a high capacity motor and stainless steel housing inserts to ensure impeller movement. The pump body is manufactured from cast iron and impeller from brass.
Pumps are close coupled to reliable TEFC electric motors for continuous operation and are provided with a thermal cutout to protect against electrical overload. They can be connected directly to the mains power supply through a 10A fuse or MCB.
Enclosure Class IP44
Voltage 1 X 240V
Insulation Class F
Pumped Liquid Thin, clean, chemically non-aggressive liquids without solid particles or fibres
Maximum Fluid Temperature +60 C
Maximum Ambient Temperature +40 C
Maximum Suction Lift 7m at sea level
Model DDP 65
Power (kW) 0.75
Maximum Operating Current (A) 5.2
Dimensions – DN1 1.5″
Dimensions – DN2 1.5″
Dimensions (mm) – L 305
Dimensions (mm) – H 181
Dimensions (mm) – W 136
Weight (kg) 10
Flush handle, chrome plated metal handle.Universal front mount, Plastic nut and spud. And universal fit.Generic replacement trip lever for all side flush handle toiletsReplacement Trip Lever.Flexible lever arm can be bent to accommodate front mount lever installations.
Suitable to be installed and used in places with high traffic such as airports, hotels, restaurants and so on.
Can dry wet hands in 20 seconds.
saves energy & power,it's only 1400w.
Very strong wind with low noise.
Easy to use.
Wall mounted with impact resistant plastic housing with a 30 second run time. 31 litre/sec. air flow
2.2 kg in weight,
Size: 203mm wide x 282mm high x 164mm deep.