Mondial Pressure Pump Control
Mondial Pressure Pump Control
KSh 8,500.00
Motor
Insulation Class F
Operating Conditions
Maximum Fluid Temperature +60C
Maximum working pressure 8 Bar
Maximum Flow Rate 6
Pump Information
Model Presscontrol 1.1kW
Power (kW) 1.1
Cut Pressure 1.5 Bar
Maximum Operating Current (A) 16
Dimension(mm) A 160
Dimension(mm) B 200
Dimension(mm) C 160
Outlet BSP 1″
Weight (kg) 1.3
The automatic pressure pump control replaces the traditional expansion vessel system, starts and stops the pump in accordance with the opening and closing of the service. It also stops the pump in case of any water shortage, hence preventing it from dry running.
Add a Review
Be the first to review “Mondial Pressure Pump Control”
Sale
Dayliff Pressure Pump Control
Pumps
This unit is programmed to perform all the pump control operations automatically
When a particular operational break down occurs, the unit recognizes the breakdown and the red led "failure" lights up. At the same time, a stop signal is sent to the pump to prevent damages caused by dry running
Rectification of the failures that have caused the blockage allows the system to be restarted by pressing the "restart" button
Features include:-
Pump stop time adjustable between 10 to 180 secs.Starts pump when flow is sensed (minimum 2.4litres/min) and stops when flow ceases.
System is un-pressured in no flow condition so eliminating pump cycling.
KSh 4,000.00
PEDROLLO- 0.7HP / 0.5KW / 220V
Plumbing- Pedrollo logo inserted in the body pump
- Quiet operation due to the anti-vibration system between the shaft and impeller
- More compact
- More efficient motor with low energy consumption and lower operating temperature.
- Special paint which gives improved resistance against environmental corrosion
- Longer life
Dayliff Submersible Pumps
Pumps
Designed for wells, boreholes and deep tanks
Operates when immersed inside the water source
Float independently and come with a cable
KSh 20,000.00 – KSh 25,000.00
Sale
Hydrochloric Acid 1 Ltr -For cleaning ceramics
Tiles & Accessories
The product is very toxic and corrosive hence may burn especially when dry,therefore it should be handled with care even in dilute form.It is recommended that you wear the following protective equipment when using the product.
Vapour respirator.
Rubber gloves.
Rubber boots.
Body and face shield.
KSh 400.00
Reviews(0)
There are no reviews yet.