Quickview PumpsThis unit is programmed to perform all the pump control operations automatically When a particular operational break down occurs, the unit recognizes the breakdown and the red led "failure" lights up. At the same time, a stop signal is sent to the pump to prevent damages caused by dry running Rectification of the failures that have caused the blockage allows the system to be restarted by pressing the "restart" button Features include:- Pump stop time adjustable between 10 to 180 secs.Starts pump when flow is sensed (minimum 2.4litres/min) and stops when flow ceases. System is un-pressured in no flow condition so eliminating pump cycling.
Quickview PumpsDesigned for wells, boreholes and deep tanks Operates when immersed inside the water source Float independently and come with a cableKSh20,000.00 – KSh25,000.00
Quickview Tiles & AccessoriesThe product is very toxic and corrosive hence may burn especially when dry,therefore it should be handled with care even in dilute form.It is recommended that you wear the following protective equipment when using the product. Vapour respirator. Rubber gloves. Rubber boots. Body and face shield.
Quickview PumpsAutomatic pump start and stop as determined by user demand Maintenance of constant output pressure Pump shutdown in the event of low suction supply or suction blockage Attenuates the effects of water hammer Completely maintenance free; no air charging or adjustment necessary Compact and simple to install Starts pump on pressure and automatically stops on low flowKSh4,000.00
Quickview PumpsMotor Insulation Class F Operating Conditions Maximum Fluid Temperature +60C Maximum working pressure 8 Bar Maximum Flow Rate 6 Pump Information Model Presscontrol 1.1kW Power (kW) 1.1 Cut Pressure 1.5 Bar Maximum Operating Current (A) 16 Dimension(mm) A 160 Dimension(mm) B 200 Dimension(mm) C 160 Outlet BSP 1" Weight (kg) 1.3
Quickview PlumbingThe Pedrollo PKm is a robust, and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass. The pumps have been remodelled and re-engineered offering the following benefits; Pedrollo logo inserted in the body pump Quiet operation due to the anti vibration system between shaft and impeller More compact More efficient motor with low energy consumption and lower operating temperature. Special paint which gives improved resistance against environmental corrosion Longer life Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop. MOTOR Pumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.KSh9,000.00
Quickview PumpsDesigned for wells, boreholes and deep tanks Operates when immersed inside the water sourceKSh7,500.00 – KSh43,000.00
Quickview PumpsThe Watertech Pump Controllers are a revolutionary integrated booster pump control units for the provision of automatic pressurized water supply. They incorporate a combination of hydraulic & electronic control functions, starting the pump when system pressure drops to the pre-set value and stopping the pump when demand drops below the cut-out flow rate. Particular features are:
- Completely maintenance free; no air charging or adjustment necessary .
- Attenuates the effects of water hammer .
- Compact and simple to install.
- Pump shutdown in the event of low suction supply or suction blockage.
- LED for power on, pump on and failure.
- Automatic pump start and stop as determined by user demand.
- Maintenance of constant output pressure.