The Pedrollo PKm is a robust, and economical pump used principally for water transfer in domestic and small scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass.
The pumps have been remodelled and re-engineered offering the following benefits;
Pedrollo logo inserted in the body pump
Quiet operation due to the anti vibration system between shaft and impeller
More efficient motor with low energy consumption and lower operating temperature.
Special paint which gives improved resistance against environmental corrosion
Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.
Pumps are close coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.
Enclosure Class PKm60 PKm65:IP44
Voltage 1 X 240V
Insulation Class F
Pumped Liquid Thin, clean, chemically non aggressive liquids without abrasive particles or fibres
Maximum Fluid Temperature +60C
Maximum Ambient Temperature +40C
Maximum Suction Lift 7m (at sea level)
Power (kW) 0.37
Maximum Operating Current (A) 2.5
Dimensions (mm) – DN1 1″
Dimensions (mm) – DN2 1″
Dimensions (mm) – L 210
Dimensions (mm) – H 145
Dimensions (mm) – H1 56
Dimensions (mm) – W 118
Weight (kg) 5.2
Low-level toilet Cistern with flush valve with push button
Compact structure and possibility of the water inflow from sides.
The flush button enables control of the amount of discharged water. Accurate valve.
Complete with adjustable elblow for the low-level flushing cistern.
The Dayliff DDP peripheral pump is specially designed for domestic and commercial water supply uses. It is of high specification peripheral featuring copper windings, a high capacity motor and stainless steel housing inserts to ensure impeller movement. The pump body is manufactured from cast iron and impeller from brass.
Pumps are close coupled to reliable TEFC electric motors for continuous operation and are provided with a thermal cutout to protect against electrical overload. They can be connected directly to the mains power supply through a 10A fuse or MCB.
This unit is programmed to perform all the pump control operations automatically
When a particular operational break down occurs, the unit recognizes the breakdown and the red led "failure" lights up. At the same time, a stop signal is sent to the pump to prevent damages caused by dry running
Rectification of the failures that have caused the blockage allows the system to be restarted by pressing the "restart" button
Pump stop time adjustable between 10 to 180 secs.Starts pump when flow is sensed (minimum 2.4litres/min) and stops when flow ceases.
System is un-pressured in no flow condition so eliminating pump cycling.
100% brand new and high quality
Color: As the picture
Size:Upper mouth inner diameter: 3.3 cm
lower mouth inner diameter: 2.6 cm
contraction length: 28.5 cm
Suitable for:Kitchen sinks and basins.
Color: As shown